Installation Instructions connect with SoundMax 5.1 to 5.1 Soundcard
2015-02-09
SoundMax 5.1 speakers is being studied and developed for use in DVD Dolby Digital 5.1 audio , AC3 , DTS . The sound is emitted on channel 6 ( channel 6 ) separate : Front Left , Front Right , Rear Left , Rear Right , Front Center and Subwoofer so for a realistic sound , every musical detail , morphing effects of the film on each channel separately and is compatible with all types Soundcard 5.1 on the market today including those left Soundcard Soundcard or onboard .
However, if the case after connecting with SoundMax 5.1 5.1 Soundcard not use 5.1 because of some reasons:
- Installing the wrong driver software ( driver ) for 5.1 Soundcard .
- Lack decoder "soft " Dolby Digital , DTS , AC3 .
- Lack of application programs slideshows DVD Dolby Digital ( 6 channel ) .
Explanation :
To save production costs and reduce product cost some 5.1 Soundcard has not integrated Dolby Digital decoder chip on the Soundcard . So , the computer requires to be installed decoder "soft " Dolby Digital , DTS , AC3 ( audio decoder 5.1 standard DVD ) .
Why when used above, SoundMax Soundcard not found to be 5.1 6 speakers while some other speakers can playback 5.1 5.1 6 speakers which when used with the Soundcard ? Due to the type of speakers that were previous emulator connection shared by all channels ( channel) together . So when connected to Soundcard , just found out a channel Soundcard ( 1channel ) , the speaker has 6 speakers emit enough without plugging wires . So customers will mistakenly believe that the emitted sound Soundcard 5.1 but was actually emulates the sound from the front speakers , always causing the subwoofer and satellite speakers also make a noise , not true effect and listen very uncomfortable .
Instructions :
- Install the correct driver software ( driver ) for 5.1 Soundcard
- Installing applications Dolby Digital DVD slideshows - Windows Media Player 10 or higher .
- Install the program supports all decoders K - Lite Codec Pack 5:00 or higher ( decoder that supports Dolby Digital , DTS , AC3 )
Note:
In addition to the DVD player - Windows Media Player 10 on. There are a number of other programs such as Power DVD , DVD Intel ... but some programs require registration to license new full 6 channel ( channel 6 ) , if not registered can only play 2 -channel ( 2 channel) . You can download the software supports the following link :
KLite Codec Pack 5.00 ( decoder ) - http://www.mediafire.com/?zmzzwjzwylm
Cyperlink PowerDVD Ultra 9.1719a (see DVD supports 8 channel audio ) - http://www.mediafire.com/?5zzi4jeiwzn
OTHER NEWS
- “Clean” the whole system to find the primitive sound quality
(2024-04-26)
- Hi-end connector
(2024-04-26)
- Processing sound in listening room
(2024-04-26)
- For speaker “songs” better
(2024-04-26)
- Interconnect and Speaker Cable - Part 1
(2024-04-26)
- Interconnect and Speaker Cable - Part 2
(2024-04-26)
- Interaction between loudspeaker and listening room
(2024-04-26)
- Layout home theater systems
(2024-04-26)
- Key principles when set-up listening room (Part 1)
(2024-04-26)
- Key principles when set-up listening room (Part 2)
(2024-04-26)